34
SG71070M
Revision A3
2-6.3 Instance View
Providing an MST instance table which includes information (VLAN membership of a MSTI) of
all spanning instances provisioned in the particular MST region which the bridge belongs.
Through this table, additional MSTP configuration data can be applied and MSTP status can be
retrieved.
Web Interface
To configure the
Instance View in the web interface:
1.
Click Configuration, MSTP, and Instance View.
2.
Click Add VLAN.
3.
Specify Instance ID, VLAN Mapping.
4.
Click apply to save the setting.
5.
If you want to cancel the setting then you need to click the reset button. It will revert to
previously saved values.
6.
Specify Instance config, port config, Instance status and port status.
Figure 2-6.3: The Instance View
Parameter description:
Instance ID
Every spanning tree instance need to have a unique instance ID within 0~4095. Instance 0
(CIST) always exists and cannot be deleted. Additional spanning instances (MSTIs) can be
added or deleted. At least one VLAN must be provisioned for an MSTI to declare the need
for the MSTI to be existent.
Corresponding VLANS
0-4095.
Multiple VLANS can belong to an MSTI. All VLANS that are not provisioned through this will
be automatically assigned to Instance 0(CIST).
Add VLAN
To add an MSTP and provide its VLAN members or modify VLAN members for a specific
MSTP.
Delete
To delete an MSTP.
Instance Config
To provision spanning tree performance parameters per instance.
Port Config
To add an MSTP and provide its VLAN members or modify VLAN members for a specific