Introduction
EPM-31 Hardware Reference Manual
16
H
ARDWARE
A
SSEMBLY
The EPM-31 mounts on four hardware standoffs using the corner mounting holes. These
standoffs are secured to the underside of the circuit board using pan head screws.
The entire assembly can sit on a table top or be secured to a base plate. When bolting the unit
down, make sure to secure all standoffs to the mounting surface to prevent circuit board flexing.
An extractor tool is available (part number VL-HDW-201) to separate the PC/104 modules from
the stack.
Related Documents
The following documents available are on the
EPM-31 Product Support Web Page
EPM
-
31 Programmer’s Reference Manual
– provides information on the board’s resources
(memory, I/O, and IRQs), a description of the FPGA’s registers, and programming
information for the board’s hardware interfaces.
EPM
-
31 BIOS Reference Manual
– provides information on accessing and configuring
settings in the BIOS Setup utility. All BIOS menus, submenus, and configuration options are
described.
VersaAPI Installation and Reference Guide
– describes the shared library of API calls for
reading and controlling on-board devices on certain VersaLogic products.
Additional documents:
Processor
Intel Atom E38xx (formerly
“Bay Trail”) System-on-Chip
(SoC) Processor
Intel Atom Processor E3800 Product Family Datasheet
Ethernet Controller
Intel I210-IT Gigabit Ethernet
Controller
PC/104 Specification
http://www.versalogic.com/products/PC104/index.asp
PC/104-
Plus
Specification
http://www.versalogic.com/products/PC104/index.asp