Video Interfaces
EBX-38 Hardware Reference Manual
39
LVDS Interface
Removal of jumper V9 disables J30 (the second Mini DisplayPort connector), and enables J33
Dual-Channel LVDS instead. The panel type select jumpers (V2, V3, V6, and V7) configure the
EBX-38 for the LVDS display device. When choosing a display device, match the characteristics
of your selection to the data in the first column of the table below. Set the panel resolution
selection jumpers (V6 and V7) to match your display device’s characteristics.
Table 17: LVDS Panel Types and Jumper Configurations
Panel Resolution
Jumper Configuration
V2
V3
V6
V7
800x600
IN
1-2
IN
IN
1024x768
IN
2-3
IN
OUT
1280x800
IN
2-3
OUT
IN
1920x1080
OUT
2-3
OUT
OUT
Supported Panel
Characteristics
LVDS
Signal Cable
Backlight
Power Cable
V6/V7 Jumper Settings
Single channel
18/24 bit
800 x 600 (SVGA)
VL-CBR-3003
VL-CBR-0601
V6
V7
2 1
2 1
2 1
Single channel
18/24 bit
1024 x 768 (XGA)
VL-CBR-3002
VL-CBR-0601
V6
V7
2 1
2 1
Single channel
18/24 bit
1280 x 800 (WXGA)
VL-CBR-3002
VL-CBR-0601
V6
V7
2 1
2 1
Dual channel
16.7M colors
1920 x 1080 (HD 1080)
VL-CBR-3001
–––
V6
V7
2 1
2 1
Integrator’s Note:
Configure the J2, J3, V6, and V7 jumpers before connecting a display panel to the EBX-38. If any
of the configuration jumpers are not properly set for the display device before power is turned on,
no image will appear.
LVDS Panel Displays Tested with the EBX-38
The table below lists the LVDS panel displays tested with the EBX-38.
Table 18: LVDS Panel Displays Tested
Manufacturer
Model Number
Display Resolution
Display Size
LVDS
Signal Cable
Sharp
LQ121S1LG42
800×600 SVGA
12.1 inches (31 cm)
VL-CBR-3003
Sharp
LQ150X1LG91
1024x768 XGA
15 inches (38 cm)
VL-CBR-3002
