Configuration and Setup
EBX-22 Reference Manual
11
CMOS Setup
The default CMOS Setup parameters for the EBX-22 are shown below. Due to changes and
improvements in the system BIOS, the information on your monitor may differ from that shown
below. The factory default date will correspond to the BIOS build date. Some values may vary
depending on the configuration of your EBX-22.
Main Tab
Main
Exit Boot POST SIO Features Firmbase Misc Board
+ ------------------------------------------------------ + ------------------- +
| | |
|
System Summary
|Use TAB to switch |
| ------------------------------------------------------ |between month, day |
|
General Software[R] System BIOS
|and year. Use digits|
| BIOS Core Version EB(SF).003 |and BKSP to change |
| VersaLogic Version 6.3.102 |field. |
| BIOS Build Date 03/19/08 | |
| System BIOS Size 128KB | |
| CPM/CSPM/BPM Modules P7C7, CX700, EBX22 | |
| StrongFrame[TM] Technology, Firmbase[R] Technology | |
| | |
|
Processor (CPU)
| |
| VIA Eden Processor 1200MHz | |
| | |
|
System Memory (RAM)
| |
| Low Memory (KB) 627 | |
| Extended Memory (KB) 449344 | |
| | |
|
Real Time Clock (RTC)
| |
|
RTC Date
[
03
/26/2008] | |
| RTC Time [13:57:20] | |
+ ------------------------------------------------------ + ------------------- +
Exit Tab
Main
Exit
Boot POST SIO Features Firmbase Misc Board
+ ------------------------------------------------------ + ------------------- +
| Save, Restore, and Exit Setup |Press ENTER to save |
| ------------------------------------------------------ |changes and reboot |
|
Save Settings and Restart
[
Enter
] |system. |
| | |
| Exit Setup Without Saving Changes [Enter] | |
| | |
| Reload Factory-Defaults and Restart [Enter] | |
| | |
| Reload Custom-Defaults and Restart [Enter] | |
+ ------------------------------------------------------ + ------------------- +
StockCheck.com
