background image

SPECIFICATIONS

Range:

 12 meters in sensor-facing direction
 12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern

 (side view, in meters)

Optical Fields-of-View:

       

   

   Long-range           Mid-range          Short-range    

                

   

  44                    36                     18                       

Sensor Optical View Pattern

 (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI  

Motion Sensor

      Operation and Specifications

SURE

N

 ©2010 SUREN Systems, Ltd.. All rights reserved. SUREN™

PYROFLEX™

,  

HighBar™

 

are trademarks of SUREN.

www.surensystems.com

IR Sensor:

 

Dual elements

Power Supply:

 

CR123A 3V Battery

Power Supply Current: 

22uA ( no alarm )

Tamper Switch:

 

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions: 

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification: 

   

( Pending )

  

Pet

 

immunity

:

10Kg

 

Events Detection:

 

HighBar™

 

false alarm rejection 

processor

RF Immunity:

 

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

 

6500 lux

Sensitivity:

 

Selectable: 2-event

 

or 3-event

Operating Temperature 

Range: 

-40°C to +55° C

Accessories:

Mounting bracket: 

MB-100

1.0

2.3

0

3

6

9

12

1.0

3.0

0

3

6

9

12

2.0

1.0

2.3

0

3

6

9

12

Short range

Short range

Long range

Middle range

0

6

9

3

6

0

12

One FOV ( field of view)

9

3

Long range

Middle range

The 

VWMSpod

-012WPI  is  a  professional  state-of-the  art  motion  sensor 

engineered  with  the  world's  best  components  and  materials.starting  with  a 

 

TM

SUREN HihgView  lens and a top quality infrared detector, Next, a patented 

modern  DSP  ASIC  directly  converts  the  infrared  detector  signal  into  digital 

form,  for  best  reliability  and  stability.  Finally,  the  signal  is  evaluated  by  a 

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with 

excellent intrude r detection.

SENSOR INITIALIZATION

Following power-on, a 

VWMSpod

-012WPI sensor is fully operational after a 

one-minute warm-up.

WALK TEST

Note: The 

VWMSpod

-012WPI should be tested once per year.

The  LED  should  turn  ON  (for  Alarm)  after  about  two  to  four  normal  steps. 

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds 

before continuing the walktest.When there is no motion in the monitored area, 

the  LED  should  remain  OFF.  It  can  be  turned  off  after  5  mins,  so  it  doesn’t 

continue to e at up power.

ALARM PROCESSING

Dual-element  detector  fields-of-view  alternate  between  (+)  and  (-)polarity. 

HighBar™-qualified signal events are counted as "pulses"exclusively when 

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The 

VWMSpod

-012WPI  is  designed  to  allow  the  presence  of  pets  (10kg

or  lighter)  without  signaling  an  alarm.  It  includes  a  special  microelement

l e n s  a r r a y  t h a t  p r o d u c e s  m u c h  s t r o n g e r  o p t i c a l  s i g n a l s  f o r

humans  than  for  pets  10kg  or  lighter.  Furthermore,  the  optical

sensitivity  of  each 

VWMSpod

-012WPI  is  factory-calibrated  to  ensure

accurate discrimination between humans and pets.

Note:  Pets  come  in  many  varieties.  Some  pets  (especially  larger

ones  with  very  short  hair),  even  if  lighter  than  10kg,  may  produce

enough  infrared  radiation  to  cause  alarms. 

VWMSpod

-012WPI  users

are  strongly  advised  to  test  the  sensor  with  their  own  pets,  in  order

to  verify  that  the 

VWMSpod

-012WPI  will  not  signal  an  alarm  when  their

pets are moving within its fields of view.

The  diagram  below  shows  the 

VWMSpod

-012WPI's  zones  of  greatest 

human/pet  discrimination.  The 

VWMSpod

-012WPI  should  be  mounted  so 

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1   Rev.3

Limitations  of  Sensor  Products:  Sensor  products  and  associated  systems  do  not  offer  guaranteed 

anyone  for  any  consequential  or  incidental  damages  for  breach  of  this  or  any  other  warranty,  express  or 

performance in ordinary situations or in special situations including but not limited to burglary, fire, or other 

implied,  or  upon  any  other  basis  of  liability  whatsoever,  even  if  the  loss  or  damage  is  caused  by  its  own 

emergencies.  They  may  fail  to  function  for  diverse  reasons,  including  (but  not  limited  to):  power  failure, 

negligence or fault.

dead  batteries,  improper  installation,  coverage  “blind  spots”,  coverage  areas  overlooked  during 

Seller  does  not  represent  that  the  products  it  sells  may  not  be  compromised  or  circumvented;  that  the 

installation, component failure, or inadequate maintenance. Sensors and their associated systems should 

products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the 

be checked weekly to ensure that all devices are working properly.

products  will  in  all  cases  provide  adequate  warning  or  protection.  Customer  understands  that  a  properly 

SUREN LIMITED WARRANTY

installed  and  maintained  alarm  system  may  only  reduce  the  risk  of  a  burglary,  robbery,  or  fire  without 

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its 

warning, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury 

own plans and specifications and to be free from defects in materials and workmanship under normal use 

or property loss as a result.

and  service  for  twelve  months  from  the  date  of  original  purchase.  Seller's  obligation  shall  be  limited  to 

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a 

repairing  or  replacing,  at  its  option,  free  of  charge  for  materials  or  labor,  any  part  which  is  proved  not  in 

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly, 

compliance with Seller's specifications or proves defective in materials or workmanship under normal use 

for  any  loss  or  damage  arising  under  this  limited  warranty  or  otherwise,  regardless  of  cause  or  origin, 

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered 

seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the 

or improperly repaired or serviced by anyone other than Seller. For warranty service, return transportation 

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk 

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No 

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized. 

There  are  no  warranties,  expressed  or  implied,  of  merchantability,  or  fitness  for  a  particular  purpose  or 

otherwise,  which  extend  beyond  the  description  on  the  face  hereof.  In  no  case  shall  seller  be  liable  to 

U.S. Patent NO: 7,042,134     7,141,910

 

Patents issued and pending worldwide.

SPECIFICATIONS

Range:

 12 meters in sensor-facing direction
 12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern

 (side view, in meters)

Optical Fields-of-View:

       

   

   Long-range           Mid-range          Short-range    

                

   

  44                    36                     18                       

Sensor Optical View Pattern

 (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI  

Motion Sensor

      Operation and Specifications

SURE

N

 ©2010 SUREN Systems, Ltd.. All rights reserved. SUREN™

PYROFLEX™

,  

HighBar™

 

are trademarks of SUREN.

www.surensystems.com

IR Sensor:

 

Dual elements

Power Supply:

 

CR123A 3V Battery

Power Supply Current: 

22uA ( no alarm )

Tamper Switch:

 

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions: 

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification: 

   

( Pending )

  

Pet

 

immunity

:

10Kg

 

Events Detection:

 

HighBar™

 

false alarm rejection 

processor

RF Immunity:

 

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

 

6500 lux

Sensitivity:

 

Selectable: 2-event

 

or 3-event

Operating Temperature 

Range: 

-40°C to +55° C

Accessories:

Mounting bracket: 

MB-100

1.0

2.3

0

3

6

9

12

1.0

3.0

0

3

6

9

12

2.0

1.0

2.3

0

3

6

9

12

Short range

Short range

Long range

Middle range

0

6

9

3

6

0

12

One FOV ( field of view)

9

3

Long range

Middle range

The 

VWMSpod

-012WPI  is  a  professional  state-of-the  art  motion  sensor 

engineered  with  the  world's  best  components  and  materials.starting  with  a 

 

TM

SUREN HihgView  lens and a top quality infrared detector, Next, a patented 

modern  DSP  ASIC  directly  converts  the  infrared  detector  signal  into  digital 

form,  for  best  reliability  and  stability.  Finally,  the  signal  is  evaluated  by  a 

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with 

excellent intrude r detection.

SENSOR INITIALIZATION

Following power-on, a 

VWMSpod

-012WPI sensor is fully operational after a 

one-minute warm-up.

WALK TEST

Note: The 

VWMSpod

-012WPI should be tested once per year.

The  LED  should  turn  ON  (for  Alarm)  after  about  two  to  four  normal  steps. 

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds 

before continuing the walktest.When there is no motion in the monitored area, 

the  LED  should  remain  OFF.  It  can  be  turned  off  after  5  mins,  so  it  doesn’t 

continue to e at up power.

ALARM PROCESSING

Dual-element  detector  fields-of-view  alternate  between  (+)  and  (-)polarity. 

HighBar™-qualified signal events are counted as "pulses"exclusively when 

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The 

VWMSpod

-012WPI  is  designed  to  allow  the  presence  of  pets  (10kg

or  lighter)  without  signaling  an  alarm.  It  includes  a  special  microelement

l e n s  a r r a y  t h a t  p r o d u c e s  m u c h  s t r o n g e r  o p t i c a l  s i g n a l s  f o r

humans  than  for  pets  10kg  or  lighter.  Furthermore,  the  optical

sensitivity  of  each 

VWMSpod

-012WPI  is  factory-calibrated  to  ensure

accurate discrimination between humans and pets.

Note:  Pets  come  in  many  varieties.  Some  pets  (especially  larger

ones  with  very  short  hair),  even  if  lighter  than  10kg,  may  produce

enough  infrared  radiation  to  cause  alarms. 

VWMSpod

-012WPI  users

are  strongly  advised  to  test  the  sensor  with  their  own  pets,  in  order

to  verify  that  the 

VWMSpod

-012WPI  will  not  signal  an  alarm  when  their

pets are moving within its fields of view.

The  diagram  below  shows  the 

VWMSpod

-012WPI's  zones  of  greatest 

human/pet  discrimination.  The 

VWMSpod

-012WPI  should  be  mounted  so 

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1   Rev.3

Limitations  of  Sensor  Products:  Sensor  products  and  associated  systems  do  not  offer  guaranteed 

anyone  for  any  consequential  or  incidental  damages  for  breach  of  this  or  any  other  warranty,  express  or 

performance in ordinary situations or in special situations including but not limited to burglary, fire, or other 

implied,  or  upon  any  other  basis  of  liability  whatsoever,  even  if  the  loss  or  damage  is  caused  by  its  own 

emergencies.  They  may  fail  to  function  for  diverse  reasons,  including  (but  not  limited  to):  power  failure, 

negligence or fault.

dead  batteries,  improper  installation,  coverage  “blind  spots”,  coverage  areas  overlooked  during 

Seller  does  not  represent  that  the  products  it  sells  may  not  be  compromised  or  circumvented;  that  the 

installation, component failure, or inadequate maintenance. Sensors and their associated systems should 

products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the 

be checked weekly to ensure that all devices are working properly.

products  will  in  all  cases  provide  adequate  warning  or  protection.  Customer  understands  that  a  properly 

SUREN LIMITED WARRANTY

installed  and  maintained  alarm  system  may  only  reduce  the  risk  of  a  burglary,  robbery,  or  fire  without 

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its 

warning, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury 

own plans and specifications and to be free from defects in materials and workmanship under normal use 

or property loss as a result.

and  service  for  twelve  months  from  the  date  of  original  purchase.  Seller's  obligation  shall  be  limited  to 

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a 

repairing  or  replacing,  at  its  option,  free  of  charge  for  materials  or  labor,  any  part  which  is  proved  not  in 

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly, 

compliance with Seller's specifications or proves defective in materials or workmanship under normal use 

for  any  loss  or  damage  arising  under  this  limited  warranty  or  otherwise,  regardless  of  cause  or  origin, 

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered 

seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the 

or improperly repaired or serviced by anyone other than Seller. For warranty service, return transportation 

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk 

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No 

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized. 

There  are  no  warranties,  expressed  or  implied,  of  merchantability,  or  fitness  for  a  particular  purpose  or 

otherwise,  which  extend  beyond  the  description  on  the  face  hereof.  In  no  case  shall  seller  be  liable  to 

U.S. Patent NO: 7,042,134     7,141,910

 

Patents issued and pending worldwide.

The VW-DP Motion is a professional state-of-the art motion sensor engineered with the world's best components and materials starting with a Versa 
HighView™ lens and a top quality infrared detector. Next, a patented modern DSP ASIC directly converts the infrared detector signal into digital form, for 
best reliability and stability. Finally, the signal is evaluated by a HighBar™ processor, for "best-in-class" false alarm rejection with excellent intruder detection.

Sensor Initialization

Following power-on, a VW-DP Motion sensor is fully operational after a one-minute warm-up.

Walk Test

Note: The VW-DP Motion should be tested once per year. The LED should turn ON (for Alarm) after about two to four normal steps. Each time the LED 
turns ON, wait for it to turn OFF. Then, wait 12 seconds before continuing the walktest. When there is no motion in the monitored area, the LED should 
remain OFF. It can be turned off after 5 mins, so it doesn’t continue to eat up power.

Alarm Processing

Dual-element detector fields-of-view alternate between (+) and (-) polarity. HighBar™ - qualified signal events are counted as "pulses" exclusively when 
polarity alternates. Depending on sensitivity setting, (+,-), (-,+), (+,-,+) or (-,+,-) will cause an alarm.

Pet Immunity

The VW-DP Motion is designed to allow the presence of pets (60 lbs or lighter) without signaling an alarm. It includes a special microelement lens array 
that produces much stronger optical signals for humans than for pets 60 lbs or lighter. Furthermore, the optical sensitivity of each VW-DP Motion is 
factory-calibrated to ensure accurate discrimination between humans and pets.

Note: Pets come in many varieties. Some pets (especially larger ones with very
short hair, even if lighter than 60 lbs) may produce enough infrared radiation to
cause alarms. VW-DP Motion users are strongly advised to test the sensor with
their own pets, in order to verify that the VW-DP MotionI will not signal an alarm
when their pets are moving within its fields of view.

This diagram shows the VW-DP Motion's zones of greatest human/pet
discrimination. The VW-DP Motion should be mounted so that pets will occupy
only the lighter-colored spaces.

Specifications

Range: 40 feet in sensor-facing direction , 40 feets at 45° angle from sensor-facing direction

Sensor Optical View Pattern (side view, in feet) 

 

Sensor Optical View Pattern: (top view, in feet)

Optical Fields-of-View: Long-range (44)  Mid-range (36)  Short-range (18)

Operation & Specifications

VW-DP Motion

Motion Sensor

SPECIFICATIONS

Range:

 12 meters in sensor-facing direction
 12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern

 (side view, in meters)

Optical Fields-of-View:

       

   

   Long-range           Mid-range          Short-range    

                

   

  44                    36                     18                       

Sensor Optical View Pattern

 (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI  

Motion Sensor

      Operation and Specifications

SURE

N

 ©2010 SUREN Systems, Ltd.. All rights reserved. SUREN™

PYROFLEX™

,  

HighBar™

 

are trademarks of SUREN.

www.surensystems.com

IR Sensor:

 

Dual elements

Power Supply:

 

CR123A 3V Battery

Power Supply Current: 

22uA ( no alarm )

Tamper Switch:

 

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions: 

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification: 

   

( Pending )

  

Pet

 

immunity

:

10Kg

 

Events Detection:

 

HighBar™

 

false alarm rejection 

processor

RF Immunity:

 

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

 

6500 lux

Sensitivity:

 

Selectable: 2-event

 

or 3-event

Operating Temperature 

Range: 

-40°C to +55° C

Accessories:

Mounting bracket: 

MB-100

1.0

2.3

0

3

6

9

12

1.0

3.0

0

3

6

9

12

2.0

1.0

2.3

0

3

6

9

12

Short range

Short range

Long range

Middle range

0

6

9

3

6

0

12

One FOV ( field of view)

9

3

Long range

Middle range

The 

VWMSpod

-012WPI  is  a  professional  state-of-the  art  motion  sensor 

engineered  with  the  world's  best  components  and  materials.starting  with  a 

 

TM

SUREN HihgView  lens and a top quality infrared detector, Next, a patented 

modern  DSP  ASIC  directly  converts  the  infrared  detector  signal  into  digital 

form,  for  best  reliability  and  stability.  Finally,  the  signal  is  evaluated  by  a 

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with 

excellent intrude r detection.

SENSOR INITIALIZATION

Following power-on, a 

VWMSpod

-012WPI sensor is fully operational after a 

one-minute warm-up.

WALK TEST

Note: The 

VWMSpod

-012WPI should be tested once per year.

The  LED  should  turn  ON  (for  Alarm)  after  about  two  to  four  normal  steps. 

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds 

before continuing the walktest.When there is no motion in the monitored area, 

the  LED  should  remain  OFF.  It  can  be  turned  off  after  5  mins,  so  it  doesn’t 

continue to e at up power.

ALARM PROCESSING

Dual-element  detector  fields-of-view  alternate  between  (+)  and  (-)polarity. 

HighBar™-qualified signal events are counted as "pulses"exclusively when 

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The 

VWMSpod

-012WPI  is  designed  to  allow  the  presence  of  pets  (10kg

or  lighter)  without  signaling  an  alarm.  It  includes  a  special  microelement

l e n s  a r r a y  t h a t  p r o d u c e s  m u c h  s t r o n g e r  o p t i c a l  s i g n a l s  f o r

humans  than  for  pets  10kg  or  lighter.  Furthermore,  the  optical

sensitivity  of  each 

VWMSpod

-012WPI  is  factory-calibrated  to  ensure

accurate discrimination between humans and pets.

Note:  Pets  come  in  many  varieties.  Some  pets  (especially  larger

ones  with  very  short  hair),  even  if  lighter  than  10kg,  may  produce

enough  infrared  radiation  to  cause  alarms. 

VWMSpod

-012WPI  users

are  strongly  advised  to  test  the  sensor  with  their  own  pets,  in  order

to  verify  that  the 

VWMSpod

-012WPI  will  not  signal  an  alarm  when  their

pets are moving within its fields of view.

The  diagram  below  shows  the 

VWMSpod

-012WPI's  zones  of  greatest 

human/pet  discrimination.  The 

VWMSpod

-012WPI  should  be  mounted  so 

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1   Rev.3

Limitations  of  Sensor  Products:  Sensor  products  and  associated  systems  do  not  offer  guaranteed 

anyone  for  any  consequential  or  incidental  damages  for  breach  of  this  or  any  other  warranty,  express  or 

performance in ordinary situations or in special situations including but not limited to burglary, fire, or other 

implied,  or  upon  any  other  basis  of  liability  whatsoever,  even  if  the  loss  or  damage  is  caused  by  its  own 

emergencies.  They  may  fail  to  function  for  diverse  reasons,  including  (but  not  limited  to):  power  failure, 

negligence or fault.

dead  batteries,  improper  installation,  coverage  “blind  spots”,  coverage  areas  overlooked  during 

Seller  does  not  represent  that  the  products  it  sells  may  not  be  compromised  or  circumvented;  that  the 

installation, component failure, or inadequate maintenance. Sensors and their associated systems should 

products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the 

be checked weekly to ensure that all devices are working properly.

products  will  in  all  cases  provide  adequate  warning  or  protection.  Customer  understands  that  a  properly 

SUREN LIMITED WARRANTY

installed  and  maintained  alarm  system  may  only  reduce  the  risk  of  a  burglary,  robbery,  or  fire  without 

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its 

warning, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury 

own plans and specifications and to be free from defects in materials and workmanship under normal use 

or property loss as a result.

and  service  for  twelve  months  from  the  date  of  original  purchase.  Seller's  obligation  shall  be  limited  to 

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a 

repairing  or  replacing,  at  its  option,  free  of  charge  for  materials  or  labor,  any  part  which  is  proved  not  in 

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly, 

compliance with Seller's specifications or proves defective in materials or workmanship under normal use 

for  any  loss  or  damage  arising  under  this  limited  warranty  or  otherwise,  regardless  of  cause  or  origin, 

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered 

seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the 

or improperly repaired or serviced by anyone other than Seller. For warranty service, return transportation 

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk 

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No 

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized. 

There  are  no  warranties,  expressed  or  implied,  of  merchantability,  or  fitness  for  a  particular  purpose  or 

otherwise,  which  extend  beyond  the  description  on  the  face  hereof.  In  no  case  shall  seller  be  liable  to 

U.S. Patent NO: 7,042,134     7,141,910

 

Patents issued and pending worldwide.

IR Sensor:
Dual elements

Sensitivity:
Selectable: 2-event
or 3-event

Events Detection:
HighBar™ false alarm
rejection processor

Housing Material:
High-impact ABS

Power Supply :
CR123A 3V Battery

Dimensions:
2.9” x 2.4” x 1.7”
( H x W x D )

RF Immunity:
20 V/m, 10-1000 MHz;
10 V/m, 1-2 

Operating
Temperature Range:
-40°C to +55° C

Power Supply
Current:
 22uA (no alarm) GHz

Approvals/
qualification:
(Pending)

White Light
Immunity:
6500 lux

Mounting bracket:
MB-100

Tamper Switch:
Sealed dome-contact

Pet immunity:
60 lbs

©2020 Versa Wireless Inc. All rights reserved. PYROFLEX™, HighBar™ are trademarks used by permission.                                                             

Versa Part No: VW-DP Motion. Rev. 1

www.versawireless.com

7.5’

3’

0

10’

20’

30’

40’

7.5’

3’

0

10’

20’

30’

40’

9’
6’
3’

0

10’

20’

30’

40’

0

10’

20’

30’

40’

0

10’

20’

30’

Reviews: