SensorDAQ User's Manual
4
SensorDAQ Components
SensorDaq features four channels to connect Vernier sensors (three analog, one
digital) as well as a screw connector providing two analog input (AI) channels, one
analog output (AO) channel, four digital input/output (DIO) channels, and a 32-bit
counter (PFI).
SensorDAQ back view
1. The
USB Cable Strain Relief is used to ensure a secure USB connection.
2. Use
the Mounting Slot and Panel Mount to mount SensorDAQ to an object.
3. The
LED blinks when SensorDAQ has power and is recognized by the DAQmx
driver.
4. The
USB Port is for computer connection.
5. Use
the Tie Wrap Point to lock down and secure the device.
SensorDAQ side view
1. Ch.1–Ch.3
BTA (British Telecom Analog) channels for Vernier analog
sensors. The Vernier voltage probe is an analog sensor.
2. Use
the Mounting Slot and Panel Mount to mount SensorDAQ to an object.
3. The
Screw Terminal Connector is available for customized input and output.
The screw terminal can be removed after being wired for specific experiments.
Replacement terminals are available separately from Vernier.
4. DIG
BTD (British Telecom Digital) input/output channel for Vernier digital
sensors.
Providing Power to SensorDAQ
SensorDAQ is powered by the USB cable from the computer.
