1
3. Turn on your sensor by pressing the
power button once. The LED will
blink red.
4. Launch Graphical Analysis 4 or
turn on LabQuest 2.
5. If using Graphical Analysis 4, click
or tap Sensor Data Collection. If
using LabQuest 2, choose Wireless
Device Setup > Go Direct from the
Sensors menu.
6. Select your Go Direct sensor from
the list of Discovered Wireless
Devices. Your sensor's ID is located
near the barcode on the sensor. The
LED will blink green when it is
successfully connected.
7. Click or tap Done. You are now
ready to collect data.
8. This is a multi-channel sensor. To
change the channel selections, see
www.vernier.com/start/gdx-acc
3. Launch Graphical Analysis 4 or
turn on LabQuest 2. You are now
ready to collect data.
4. This is a multi-channel sensor. To
change the channel selections, see
www.vernier.com/start/gdx-acc
Charging the Sensor
Connect Go Direct Acceleration to the included Micro USB Cable and any
USB device for two hours.
You can also charge up to eight Go Direct Acceleration Sensors using our
Go Direct™ Charge Station, sold separately (order code: GDX-CRG). An LED
on each Go Direct Acceleration indicates charging status.
Charging
Orange LED next to battery icon is solid while
sensor is charging.
Fully charged
Green LED next to battery icon solid when
sensor is fully charged.
Powering the Sensor
Turning on the sensor
Press button once. Red LED indicator next to
Bluetooth icon flashes when unit is on.
Putting the sensor in sleep
mode
Press and hold button for more than three
seconds to put into sleep mode. Red LED
indicator stops flashing when sleeping.
Go Direct
®
Acceleration
(Order Code GDX-ACC)
Collect acceleration, rotation, and altitude data in
the classroom or in the field. Go Direct Acceleration
connects wirelessly via Bluetooth
®
or wired via USB to your device. This 3-axis
acceleration sensor has two acceleration ranges plus an altimeter and a 3-axis
gyroscope.
l
Measure helmet impacts in concussion-related investigations.
l
Slip it into your pocket and pirouette or ride a half-pipe.
l
Zip-tie this accelerometer to your bicycle or affix it to your lab cart without
any dragging cables.
Note:
Vernier products are designed for educational use. Our products are not
designed nor are they recommended for any industrial, medical, or commercial
process such as life support, patient diagnosis, control of a manufacturing
process, or industrial testing of any kind.
What's Included
l
Go Direct Acceleration
l
Micro USB Cable
l
Shim plate for cart
l
U-bracket for cart
l
Cylinder mounting plate
Compatible Software
See
www.vernier.com/manuals/gdx-acc
for a list of software compatible with
Go Direct Acceleration.
Getting Started
Please see the following link for platform-specific connection information:
www.vernier.com/start/gdx-acc
Bluetooth Connection
USB Connection
1. Install Graphical Analysis 4 on
your computer, Chromebook™, or
mobile device. If using LabQuest 2,
make sure LabQuest App is up to
date. See www.vernier.com/ga4 for
Graphical Analysis 4 availability or
www.vernier.com/downloads to
update LabQuest App.
2. Charge your sensor for at least
2 hours before first use.
1. If using a computer or
Chromebook, install Graphical
Analysis 4. If using LabQuest 2,
make sure LabQuest App is up to
date. See www.vernier.com/ga4 for
Graphical Analysis 4 availability or
www.vernier.com/downloads to
update LabQuest App.
2. Connect the sensor to the USB
port.