6
20300058
VSW30 Series Wood Stove
REMOVE ThE STOVE FROM ThE PALLET
ANd ATTACh ThE LEGS
MOdELS VSW30FTAL, VSW30STAL
CAUTION:
Stove is extremely heavy. You will need
help installing the legs and moving your stove to its final
location.
NOTE:
The fiberboard baffle is secured with two screws
for shipping purposes only. These screws are located
behind the rear tube and may be removed prior to use, if
so desired.
The legs are packed inside the stove with bolts for
assembling legs to the stove. Useful note: If you misplace
the bolts in the leg pack, the bolts used to hold the
shipping bracket to the stove can be used to hold the legs
in place.
Tools required: 7/16" & 9/16" wrench or socket.
1. Remove the foam leg pack from inside your stove. The
pack should contain 4 legs and 8 bolts.
2. To begin the leg installation remove the bolts from the
hold down brackets from the pallet
only
. This is so
you will be able to move the stove to the edge of the
pallet and install the legs one at a time. (9/16
"
wrench
or socket.)
Figure 2
UNPACk ANd ATTACh LEGS
ST1042
stove on pallet
Figure 2
ST1042
3. Slide the stove so that a rear corner of the stove is
extended past the edge of the pallet just enough to
install rear leg.
Figure 3
4. Remove both bolts from the rear leg location of the hold
down bracket and
one
of the bolts from the front leg
location of the same hold down bracket. (7/16
"
wrench
or socket.)
5. Swing hold down bracket out from stove just far enough
to install rear leg.
Figure 4
Figure 3
ST1043
turn stove
ST1043
Figure 4
ST1044
hold down bracket
Hold Down Bracket
FP1044
6. Use the bolts provided to install the rear leg. (7/16
"
wrench or socket.)
. Figure 5
ST1045
attach leg
Figure 5
ST1045
