background image

2

Encore Woodburning Stove

30003842

Congratulations on your choice of a Vermont Castings Encore. With this purchase you have made a commitment to 
make the hearth a place of warmth, beauty, and comfort in your home. At CFM Corporation, we share that joy and 
appreciation for the hearth. You may be assured that your cast-iron Vermont Castings stove has been made with the 
utmost care and will provide you with many years of service.
As you become acquainted with your new stove or fireplace, you will find that its visual appearance is matched by its 
functionality, due to cast iron’s unique capability to absorb and radiate heat. 
Also, CFM Corporation units are among the cleanest-burning wood stoves and fireplaces available today. As an owner 
of a Vermont Castings stove, you make a strong statement for pollution-free energy. Clean burning, however, depends 
on both the manufacturer and the operator. Please read this manual carefully to understand how to properly operate 
and maintain your stove or fireplace.
At CFM Corporation, we are equally committed to your satisfaction as a customer. That is why we maintain an exclu-
sive network of the finest dealers in the industry. Our dealers are chosen for their expertise and dedication to custom-
er service. They are factory-trained and knowledgeable about every CFM Corporation product. Feel free to contact 
your Authorized Vermont Castings Dealer anytime you have a particular question about your stove or its performance.
This manual contains valuable instructions on the installation and operation of your Vermont Castings stove. It also 
contains useful information on maintenance and assembly of this product. We urge you to read the manual thoroughly 
and to keep it as a reference.
Sincerely,

All of  us at CFM Corporation

Welcome

This manual describes the installation, operation, and 
maintenance of the Vermont Castings Encore Model 
2550CE catalytic-equipped wood burning heater.  This 
heater meets the U.S. Environmental Protection Agen-
cy’s emission limits for wood heaters sold on or after 
July 1, 1990.  Under specific test conditions this heater 
has been shown to deliver heat up to 10.1 kW (34,500 
BTU/hr).
The Encore Model #2550CE has been tested to cur-
rent standards. The test standards are UL-1482 and 
ANUL-737 for the United States, and EN13240:2001 
+ A2:2004 for Europe. The Encore is listed for burning 
wood.  Do not burn other fuels.  The Encore is listed 
and approved for use in mobile homes in the United 
States only when installed with Vermont Castings Mo-
bile Home Kit #3251.
We recommend that you hire a professional installer 
install your stove, or to advise you on the installation 
should you attempt to install it yourself.
Please read this entire manual before you install and 
use your new stove.  Failure to follow instructions may 
result in property damage, bodily injury, or even death.

Accessories

 

Warming Shelves
  #1560  Classic Black 

#1562  Sand

  #1555  Biscuit 

#1565  Bordeaux

  #1556  Chestnut Brown 

#1566  Forest Green

  #1557  Ebony 

#1567  Midnight Blue

  #1558  Vt. Classic Green  #1568  Suede Brown 
# 0164 Bottom Heat Shield
# 0173 Rear Heat Shield 
# 3257 Outside Air Adapter
# 3251 Mobile Home Kit 
# 0191 Heat shields for the chimney connector
- Matching porcelain stovepipe

Specifications ....................................... 3
Installation ............................................ 4
Assembly ............................................ 12
Operation ............................................ 13
Draft Management .............................. 19
Maintenance ....................................... 21
Appendix: Catalytic Combustor .......... 27
Replacement Parts ............................. 28
Warranty ............................................. 31

Table of Contents

Summary of Contents for Encore 2550CE

































Reviews: