Modulo V-Drive
2020-05
Uso del modulo V-Drive
6
EN
NL
IT
3.1.4
Installazione del pacco batterie
1.
Collocare il pacco batterie nell’apposito vassoio, come
mostrato nell’immagine
.
2.
Fissare il pacco batterie spingendolo a fondo all’interno. Si
percepisce un clic.
3.2 Smontaggio del modulo V-Drive per il trasporto
1.
Spegnere il modulo V-Drive.
2.
Scollegare il modulo V-Drive dalla
console di comando (§ 3.1.3,
elemento 11).
3.
Rimuovere la cinghia di sollevamento dalla maniglia di spinta
(§
3.1.3, elemento 12).
4.
Rimuovere dal vassoio il pacco batterie tirando la maniglia di
quest’ultimo e premendo contemporaneamente il pulsante
PUSH (13) presente sul fondo del pacco batterie stesso.
5.
Tirare verso l’alto la cinghia
(§ 3.1.2, elemento 6) per sbloccare
la barra telescopica (§ 3.1.3, elemento 8). Trattenere il modulo
V-Drive e spingere leggermente in avanti la carrozzina, in modo che la barra telescopica
fuoriesca dalle staffe. Rimuovere il modulo V-Drive dalla carrozzina.
6.
Collocare tutti gli articoli nell’apposita borsa di trasporto, per evitare che si danneggino.
7.
Se occorre / lo si desidera
, è ora possibile ripiegare la carrozzina per
il trasporto.
3.3 Gestione del modulo V-Drive quando non è in uso
Quando si desidera spingere manualmente la carrozzina, senza utilizzare
il modulo V-
Drive, fissare quest’ultimo in posizione sollevata da terra
sollevando l’anello rosso della cinghia di sollevamento e collocandolo
sulla maniglia di spinta.
La batteria fornita con il modulo V-Drive è classificata come articolo sicuro per i viaggi aerei
in conformità alla disposizione speciale IATA A67.
11
13
8
9
10
12