Vermeer S925TX, Operator'S Manual

Page: 87 / 104

S925TX Mini Skid Steer Operating the Machine 50-9
Digging with the Bucket
Step 1: Fully lower lift arms.
Step 2: Tilt bucket forward until cutting edge of bucket contacts the ground.
Step 3: Move machine forward slowly, continuing to tilt bucket down until it enters the ground to desired
depth.
Step 4: Tilt bucket backward slightly to increase traction and maintain an even digging depth.
Step 5: Continue driving machine forward until bucket is full.
If ground is hard, tilt bucket forward and backward while driving slowly forward.
Step 6: When bucket is full, tilt bucket fully backward.
WARNING: Cliff and high banks can fall on you. Take care when working below
overhangs. Do not dig away beneath them. Look out for rock falls and soil slips.