Vermeer S925TX, Operator'S Manual

Page: 60 / 104

30-6 Transporting the Machine S925TX Mini Skid Steer
Loading with Crane
A lift eye (1) is provided to hoist the machine onto the transport vehicle
with a crane. Fully raise lift arms and install lift arm support bar
before lifting for proper balance of the machine.
T
OWING THE
M
ACHINE
• Towing requires bypassing the
ground drive pump and releasing
the park brake.
Step 1: Apply park brake. Refer to
“Park Brake,”
page 20-9.
Step 2: Attach a suitable towing chain
to front tie-down point
(1) or
rear tie-down points (2) to
retrieve the machine if the
machine becomes mired or disabled.
Step 3: Raise loader arms and install lift arm support bar. Refer to “Lift Arm Support Bar - Install/Remove,” page 60-2.
Step 4: Follow Shutdown Procedure , page 23-1. Leave loader arms raised. Refer to “Right Joystick - Lift/Tilt
Controls,” page 20-8.
1
2
1