Vermeer S725TX, Operator'S Manual

Page: 67 / 90

S725TX Mini Skid Steer Operating the Machine 50-1
Section 50: Operating the Machine
L
OAD
C
APACITIES
The S725TX has a rated operating capacity of 750 lb (340 kg) when tested in accordance with SAE J2752 and
ISO 14397-1 standards
NOTICE: Ensure weight of attachment plus materials being handled does not exceed the machine’s operating
capacity. Very dense materials weigh more than less dense materials; reduce load size when lifting dense
materials. Refer to manuals supplied with attachments for attachment weights.
D
RIVING
S
AFETY
Before Driving
Until the operator is familiar with the controls and understands the capability of the machine, use a slower
ground speed to move the machine. Use reduced speeds when operating in rough terrain or in small areas.
A handgrip bar is provided to allow the operator to keep both hands on the bar to securely ride on the machine.
Always keep both hands firmly on the handgrip before starting to move the machine. Keep both hands on the
grip whenever moving or operating ground drive controls. Return controls to NEUTRAL before removing your
hands from the handgrip bar. Before driving or operating the mini skid steer, survey the area around the
machine for persons or obstacles.
Place your hands, palms down, on the handgrip bar so your fingers are on the forward area of the bar and the
palms on the rear portion of the bar, with the joystick knob cradled between your thumb and forefinger. This
provides a secure grip and good lever control.
This machine is not intended to be driven on public roads.