Vermeer S725TX, Operator'S Manual

Page: 41 / 90

S725TX Mini Skid Steer Shutdown Procedure 23-1
Section 23: Shutdown Procedure
NOTICE: For your safety and the safety of others, use the shutdown procedure before working on the machine
for any reason, including servicing, cleaning, or inspecting the machine.
Park machine on a level surface.
Step 1: Move Ground Drive Joystick to NEUTRAL.
Step 2: Move Attachment Levers to OFF.
Step 3: Fully lower attachment onto the ground.
Step 4: Move Throttle to half throttle and run for a minimum of 15 seconds.
Step 5: Move Throttle fully back to idle.
Step 6: Shut off engine and remove key.
A variation of the above procedure may be used if so instructed within this manual or if an emergency requires it.
NOTICE: Park brake will engage when operator steps off platform or engine is shut off and spring-applied park
brake pin is aligned between sprocket teeth. The brake will engage within 4˝ (10 cm) of travel.