Vermeer S450TX, Quick Start Manual

Page: 43 / 100

S450TX Mini Skid Steer Starting Procedure 22-1
Section 22: Starting Procedure
S
TARTING THE
E
NGINE
Step 1: Stand with both feet on operator platform.
Step 2: Ensure Ground Drive Joystick (1) is in NEUTRAL.
Step 3: Move Auxiliary Attachment Drive Lever (2) to NEUTRAL.
Step 4: Move Throttle (3) to half throttle position.
Step 5: Turn ignition key (4) to RUN position, then press Glow Plug
Button (5) and hold for 10–15 seconds. Continue to hold button
while starting engine.
Step 6: Turn ignition key to START position; release when engine starts.
NOTICE: If engine does not start within 10 seconds, turn key OFF, wait 30
seconds, then start engine starting sequence over again. Do not allow the
starter motor to run continuously for more than 20 seconds.
Step 7: Check to see that oil pressure warning light goes off. If not, shut off engine and correct the issue.
Step 8: Warm up engine at medium speed. Do not operate the engine under load until engine has warmed up.
Refer to the Engine Operation Manual for detailed information.
1
2
3
4
5