Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 54 / 182

30-4 Transporting the Machine V25/VX30G/VSK25/VSK30G Vacuum Excavators
P
REPARE
M
ACHINE FOR
T
RANSPORT
Before transporting the machine:
• Ensure Strong Arm attachment is locked in transport position.
• Ensure Hose Reel Lock Pin is in locked position.
• Ensure all machine components and tooling are stored properly. Secure all tools and accessories carried on
the vehicle.
• Follow Shutdown Procedure , page 23-1 , and relieve water system pressure.
• Close all valves and doors. Ensure spoil tank door is fully closed and latched.
• Ensure tires and rims are in good condition, and tires are inflated properly.
• Check condition and operation of trailer lights and brakes.
• Follow remaining procedures in this section for safely attaching to tow vehicle.
Vacuum Tools - Store for Transport
(1) Potholing/Vacuuming Tool/Spray Wand
(2) Hoses
Place tools in storage tubes or brackets and secure with lock pins.
Note that storage locations may vary by model and configuration.
1
2