Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 169 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Specifications 130-1
Section 130:
Specifications
L
UBRICANTS
Lubricant / Recommendation Capacity Specification /Notes
Engine Oil (with Filter) With filter: Engine must be level when checking engine oil.
Honda: 4-stroke automotive
detergent oil
1.8 qt (1.7 L) SAE 10W30 or SAE 5W30
SAE 5W30 at -13° to 5°F (-25 to -15°C)
Briggs & Stratton Vanguard:
High-quality detergent oil
78–80 oz (2.3–2.4 L) SAE 30 - Below 40°F (4°C) use of SAE 30 may cause hard
starting.
10W30 - Above 80°F (27°C) use of 10W30 may cause
increased oil consumption. Check oil level more frequently.
5W30 at -20 to 40°F (-29 to 4°C)
Synthetic 5W30 at -20 to 100°F (-29 to 38°C)
Vanguard Synthetic 15W-50 at 20 to 120°F (-7 to 49°C)
Electric Hydraulic Power Pack Bucher Hydraulic Inc. 12v Electric Hydraulic Power Pack
ATF Dexron II or equivalent 4.5 qt (4.3 L) Use caution not to get dirt or other contaminants into
system when servicing. Filter all fluid through a 10-micron
filter before adding.
0 to 120°F (-18 to 40°C) SAE 10 or ATF Dexron II
32 to 175°F (0 to 80°C) SAE 20
Blower Howden Roots Vac Pump 575 RH Shaft Top Out
Roots Synthetic Oil, Mobil DTE BB,
Texaco R&O 220, Amoco 220, or
equal non-detergent motor oil 28 oz (820 ml) gear
end; 15 oz (440 ml)
drive end (approx.) ISO 100 below 0°F (-18°C)
ISO 150 at 0 to 32°F (-18 to 0°C)
ISO 220 at 32° to 90°F (0 to 32°C)
ISO 320 above 90°F (32°C)