Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 161 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Maintenance - As Required 120-5
Sheaves - Inspect
• Damaged, worn or dirty sheaves (1) will substantially reduce belt life.
• Nicks or gouges can cut the belt.
• Dirt in the grooves can damage the belt and will allow the belt to bottom out, slip
and become damaged.
• A sheave groove gauge can be used to determine uneven and abnormal wear.
NOTICE: When placing the new belt in the groove, the top of the belt should be flush
with the outer diameter of the sheave. If the belt top is below the outer diameter of the
sheave, the groove is worn.
WARNING:
Do not clean the sheaves while the machine is running. Shut off engine before removing
or installing sheaves. Take sheaves off machine to inspect, clean and repair them.
WARNING: Do not install damaged or worn sheaves on equipment. Repair or replace them.
1