Pos.
Component
Intervals
1
Hoisting gear
Lubricated for the design working period
of the product
2
Chain
From 1 week up to a year (depending on
the usage)
NOTE
Only lubricate the instructed components. Other components are lubricated for the
design working period of the product.
7.7.4
Lubricant information
1 Hoisting gear
Lubricated with oil. Lubrication lasts for the design working period of the product.
Standard lubricant
Installation
Trade name and number
Quantity
Factory installed
Mobil ATF 320
Lubricated for the design working
period of the product
If you must add lubricant for the hoisting gear, see the following table for the correct fill amount.
Frame size
Quantity [l]
Quantity [pt]
05
0.23
0.49
10
0.6
1.27
2 Chain
Lubricated with oil.
• Lubricate the chain carefully before the first run (commissioning).
◦ Apply a substantial amount of lubricant over the full length of the chain
◦ Make sure that the chain is lubricated all over its surface and links, especially on all contact
areas between the chain links.
• To extend the chain lifetime, continue to lubricate the chain within regular intervals.
• Chain lubrication interval varies from a minimum of one week to one year, depending on the
usage.
Standard lubricant
Installation
Trade name and number
Quantity
Lubricate before first run
Mobilgear 600 XP 220
As required
GEBRUIKERSHANDLEIDING
Dit document en de daarin vervatte informatie vormt het exclusieve eigendom van Verlinde S.A.S. en vertegenwoordigt
een niet openbaar, vertrouwelijk en gepatenteerd handelsgeheim dat niet mag worden vermenigvuldigd, onthuld aan
derden, gewijzigd, of anderszins op enigerlei wijze mag worden toegepast zonder de uitdrukkelijke schriftelijke
toestemming van Verlinde S.A.S. Copyright 2020 © Verlinde S.A.S. Alle rechten voorbehouden.
4/2020
