Verizon CR1000B, User Manual

Page: 30 / 194

30
02 / CONNECTING YOUR
VERIZON ROUTER
©2022 Verizon. All Rights Reserved
2.1/ COMPUTER NETWORk CONFIGURaTION
Each network interface on your computer should either
automatically obtain an IP address from the upstream Network
DHCP server (default configuration) or be manually configured with
a statically defined IP address and DNS address. We recommend
leaving this setting as it is.
2.1a/ CONFIGURING DYNaMIC IP aDDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet Network and Internet, then select
View Network Status and Tasks View Network Status and Tasks.
2. In the View your active networks – Connect or disconnect View your active networks – Connect or disconnect
section, click Local Area Connection Local Area Connection in the Connections Connections
field. The Local Area Connection Status window displays.
3. Click Properties Properties. The Local Area Connection Properties
window displays.
4. Select Internet Protocol Version 4 (TCP/IPv4) Internet Protocol Version 4 (TCP/IPv4), then click
Properties Properties. The Internet Protocol Version 4 (TCP/IPv4)
Properties window displays.
5. Click the Obtain an IP address automatically Obtain an IP address automatically radio button.
6. Click the Obtain DNS server address automatically Obtain DNS server address automatically radio
button, then click OK OK.