Table 1-6
Storage Shelf rear panel
(continued)
Details
Element
Number
Not lit - power is not detected
Solid green - power is ok
Flashes green - power supply is not turned on
Red - power cannot be turned on
Power supply LED
6
Note:
When the Veritas Storage Shelf starts, the primary I/O module (on the left
side of the rear panel) starts first. Its LED turns green a few seconds after the start.
The LED of the secondary I/O module (on the right of the rear panel) starts after
the primary module is operational.
Product documentation
This document is available to customers and end-users.
The following tables describe the hardware and software documents that are
available at the following site.
NetBackup Appliance documentation
Table 1-7
NetBackup Appliance and Storage Shelf hardware-related
documentation
Description
Document
Describes all aspects of the appliance and the attached
storage shelf. Provides general safety, compliance, and
environmental information.
Product Description
Provides detailed safety information. Provides the
guidelines for routine monitoring and physical
maintenance of the appliance.
Safety and Maintenance Guide
Table 1-8
NetBackup Appliance and Storage Shelf software-related
documentation
Description
Document
Provides information to set up the appliance in your
network and to create storage partitions.
Initial Configuration Guide
15
Introduction
Product documentation
