VERITAS Access 3340 Command Reference Manual Download Page 21

Page: 21 / 110

Manage > Software > List

Manage > Software > List

– Lists the available patch information.

SYNOPSIS

List AvailablePatch

List Details All

List Downloaded

List Downloaded Details [update_name]

List EEBs

List Version

DESCRIPTION

'This command shows the patches that have been applied to a particular appliance.
In addition, you can use this command to show the patches that are available for
installation for a particular appliance node.

OPTIONS

List AvailablePatch

Use this command to check the Veritas site for any software updates that are
available.

List Details All

Use this command to view all of the release updates that are available.

List Downloaded

List downloaded software updates.

List Downloaded Details

update_name

List the detailed information of a downloaded software update.

List EEBs

Show a detailed listing of all of the factory-installed Emergency Engineering
Binaries (EEBs).

List Version

Use this command to view the version of your appliance node.

Main > Manage > Software

Manage > Software > List

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands