VERITAS Access 3340 Command Reference Manual Download Page 20

Page: 20 / 110

Manage > Software > Install

Manage > Software > Install

– Use to install an EEB or a software release

update.

SYNOPSIS

Install

update_name

DESCRIPTION

Use this command to install a new or an existing software update or an engineering
binary (EEB) to an appliance node that you designate.

To use this command you must know the name of the software update or EEB that
you want to install. To see a list of the software updates and EEB that are available
for you to install, run

Software > List AvailablePatch

command. This command

checks the Veritas site for the latest software update. Once you find the software
update or EEB that you want to install, you must run the

Software > Download

update_name

command

, where

update_name

is the name of the software update.

After you have downloaded the software update, you can now run the

Software

> Install

update_name

command.

OPTIONS

Install

update_name

Install a software release update.

update_name

is the name of the update that you want to install.

Main > Manage > Software

Manage > Software > Install

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands