Scraper Shave
05P33.70
Page 1: ...Scraper Shave 05P33 70 ...
Page 2: ...d to Rc48 52 and comes with a finely ground 45 cutting edge that can be readily burnished to create a long lasting hook Instructions for Use The scraper shave can be used with either a pushing or a pulling action This allows you to always work with the grain This may involve frequent changes of direction flipping the tool and pulling or pushing as required Blade Adjustment Caution Be aware that th...
Page 3: ... much scraping and not enough cutting producing dust not shavings Smaller angles closer to horizontal may not cut at all as no cutting edge is introduced to the wood or there may be no relief angle and the blade will just slide along the surface of the workpiece Care and Maintenance The blade and machined surfaces on the scraper body come treated with rust preventative Remove this using a rag damp...
Page 4: ...d scratches Every so often take the scraper shave apart to clean and lubricate it where necessary Remove the toe and the blade Clean all parts with a cloth dampened with a dab of light machine oil For corrosion we recommend you first remove the rust with a fine rust eraser then treat as described above The bright finish on the brass components can be maintained as above If a patina finish is prefe...
