manualshive.com logo in svg

Verint Nextiva S4200-2V-BZ, User Manual

Share
Download
Verint Nextiva S4200-2V-BZ User Manual Download Page 94

4: Using the Web Interface

88

Verint Video Intelligence Solutions

Configuring HTTP (Webserver)

A series of parameters help configure the communication between the web page on the 
computer and the device.

To configure the HTTP parameters:

1. In the navigation pane, expand Configuration > Advanced, then click HTTP 

(Webserver). The HTTP parameters appear. 

2. In the HTTP Server IP Port box, enter the TCP port number in the device on which the 

HTTP requests will be made. Default in all web applications is 80.

3. In the Web Streaming Method list, select the protocol used for transmitting video. 

The available values are:

†

VSIP/UDP—A legacy protocol, using the proprietary VSIP video protocol over UDP. 
The preferred UDP mode is RTP/UDP.

†

VSIP/TCP—A protocol using the proprietary VSIP video protocol over TCP. This 
protocol guarantees proper reception of video packets, but could slow down the 
effective frame rate to an unacceptable level (default). 

†

Multicast UDP—A protocol using RTP (Real Time Transport Protocol, RFC 3550) over 
UDP that transfers video to a multicast group. It does not guarantee proper 
reception of video packets.

†

RTP/UDP—A protocol using RTP (Real Time Transport Protocol, RFC 3550) over UDP 
that transfers video to a unique recipient. It does not guarantee proper reception of 
video packets.

Note: If you change any of these parameters, you must refresh the web page (for 

instance, by pressing F5).

Summary of Contents for Nextiva S4200-2V-BZ

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands