4: Using the Web Interface
82
Verint Video Intelligence Solutions
Looking at Video Status
The video status presents the current values of video characteristics for each video
encoder. These internal parameters are useful when troubleshooting the device with the
assistance of a customer service specialist.
To see the video status of the device:
1. In the navigation pane, expand Configuration > Advanced > Video Status, then
click the desired encoder. The video status parameters appear.
The available information is:
Current Frame Rate—The current frame rate of the encoder, in frames per second.
Current Bit Rate—The current number of kilobits per second generated by the
encoder.
Current Quantizer—The current quantizer used by the encoder, multiplied by 100.
Average Frame Rate—The average frame rate in the encoder, in frames per second.
It is based on a 2-minute moving average.
Average Bit Rate—The average number of kilobits per second generated by the
encoder. It is based on a 2-minute moving average.
Average Quantizer—The average quantizer, multiplied by 100. It is based on a
2-minute moving average.
Video Input Locked—The indication of whether the input signal is locked.
Video Decoder AGC Value—The automatic gain control value of the video
analog-to-digital converter.
