Verint Nextiva S1900e Series, User Manual

Page: 44 / 79

3: Using the Web Interface
34 Verint Video Solutions
„
Show Transmitter Name—To show or hide the name of the associated transmitter above
the display option, in the bottom left corner of the monitor. You provide the name to
display in the Transmitter Name parameter. The Show Transmitter Name parameter
appears only when the receiver is in Solo mode.
„
Transmitter Name—The name of the transmitter to be displayed when Show Transmitter
Name is enabled. This parameter appears only when the receiver is in Solo mode.
„
Opacity—The level of opacity of the information displayed over the video. A value of 0
indicates that the information is totally transparent (it is not showing); a value of 255
means that the data covers completely the video.
Decoders
If the receiver mode (presented on page 27) is Quad, you can customize each quadrant on
the analog monitor. Quadrant 1 corresponds to decoder 1, and so on for the other
quadrants. The quadrant numbering is:
If the mode is Guard Tour, you can display different on-screen information for each of the
four cycling video streams.
The parameters specific to each decoder are:
„
Decoder Starve—What is displayed on the quadrant or monitor when the receiver is not
receiving video. Possible values are:
†
Color bar
†
Last decoded image
†
Black
†
White
1 2
3 4