Verint Nextiva S1100, User Manual

Page: 44 / 107

4: Using the Configuration Assistant
32 Verint Video Intelligence Solutions
Getting Started
You find the Configuration Assistant executable file (
ConfigurationAssistant.exe
) on the
Utilities CD shipped with your devices and in the firmware file downloaded from the Verint
Video Intelligence Solutions extranet (Technical Support, then Downloads, then Firmware
Upgrades).
With this software tool, you configure the transmitter and receiver S1100 devices in a
single operation. In a repeater context, you will need SConfigurator,
another Verint tool, to
configure the S3100-RP devices.
To install the Configuration Assistant:
„
Copy the executable file of the Configuration Assistant to the hard disk of your
computer.
To get started with the Configuration Assistant:
1. Ensure that the receiver is connected to a COM port of your computer using the DB-9
end of the supplied CAB9P serial cable.
Warning: You need to disable any program using this COM port prior to starting this
procedure.
2. Ensure that both S1100 devices are running.
3. In Windows Explorer, start the
ConfigurationAssistant.exe
program.
The Configuration Assistant window appears.
4. Ensure that the proper COM port name is displayed in the toolbar.