Verint Nextiva S1100, User Manual

Page: 20 / 107

2: System and RF Planning
8 Verint Video Intelligence Solutions
Wireless Cells
A wireless network is designed such that information can travel back and forth between two
points without the need for wires. Wireless devices are grouped into wireless cells. The
devices in a cell communicate together on the same frequency channel and share the same
wireless passkey.
The S1100 automatically adjusts the transmission speed with the current RF conditions.
You can use the S1100 devices in two types of applications:
„
Point-to-point system, which requires a single wireless cell:
The S1100 receiver is the SDCF master, and the transmitter is the client.
„
Point-to-point repeater, which is the combination of two wireless cells:
When planning your wireless systems, you have to take into account the firmware versions
of the involved devices:
„
The two S1100 devices making up a pair must have the same firmware version.
„
In a point-to-point repeater, it is recommended that the S1100 devices have the same
firmware versions as their associated S3100 master.
In a point-to-point repeater, you update the firmware the following way:
1. Update the firmware of all S1100 pairs, starting with the remote device.
2. Change the IP address of the computer running SConfigurator (refer to the Nextiva
S3100 Series User Guide).
3. Update the firmware of the two S3100 devices.
-T -R
Client Master
Repeater Transmitters Receivers