25
3.6
TROUBLE SHOOTING
It is extremely important for the user to know when the
behaviour that seems like a malfunction really is not.
Among these are some that the user can easily correct
following our simple instructions, while in other cases it
is necessary to get in touch with our service personnel.
We also wish to remind you that any attempts to repair
the equipment made by unauthorized personnel will
immediately invalidate the warranty.
3.6.1
Functional aspects that should not be mistaken for
malfunctions
-
The compressor does not start up again immediately
after a stop (it takes about three minutes to start up
again).
The operating logic of the device provides a delay
between stoppage of the compressor and starting up
again.This is to safeguard the compressor.
-
When heating, on versions with the heat pump, the
machine does not start emitting heat until a few
minutes after the compressor starts.
If the fan should go into operation at the same time as
the compressor, for the first few minutes it would emit
cold air into the room (and this could disturb the
occupants) as the heating function needs some time to
warm up.
This is why the fan startup is delayed until the
compressor has started.
CHAP. 3.7
RECOMMENDATIONS FOR ENERGY SAVING
-
Always keep the filter clean (see chapter on
maintenance and cleaning).
-
Keep the doors and windows closed in the air
conditioned rooms.
-
Keep sunlight out of the room by closing curtains,
lowering the shades or closing the shutters.
-
Do not obstruct the air flow (intake and outlet) on the
units, this in addition to reducing the performance of
the system, will jeopardize correct operation and
could cause irreparable damage.
Summary of Contents for 91154AA
Page 2: ...2 BLANK PAGE ...
