Specifications
Network Interface
Service Type:
DDS-I or DDS-II clear
channel
Operating Modes: Full duplex, point-to-point,
multi-point
Line Rate:
56 and 72 kbps
Loop Range:
Up to 45 dB of loss
Line Connection:
RJ-48C jack, 8-pin
modular
Timing Source:
DDS-I: Network, Internal
DDS-II: Network
Antistream Timer: Off, 10, 30, or 60 seconds
Supervisory Port
Connection:
8 - pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
SLIP Port
Connection:
8 - pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
Ethernet (option)
Connection:
8 - pin modular
Network Protocol: TCP / IP-based networks
Data Rate:
10 Mbps
Compatibility:
10BASE - T, ISO/IEC
8802-3
Token Ring (option)
Connection:
8 - pin modular (RJ-45)
Network Protocol: TCP / IP based networks
Data Rate:
4 or 16 Mbps
Compatibility:
Type 3 UTP, ISO/IEC
8802-5
Dial Backup
Connection:
6-pin modular
Backup Service:
ISDN, sync
Configuration:
Information for backup
unit is stored in unit and
transmitted to backup unit
by inband AT commands.
Dialing:
Numbers programmed and
stored in unit and
transmitted to backup unit
by inband AT commands.
Restoral:
Manual or automatic restoral
to leased line service
Diagnostics
Loopbacks:
V.54 (send and receive),
alternating loop (DDS-I),
latching loop (DDS-II)
BERT:
511 pattern
Alarms
Activation:
Programmable thresholds
Reporting:
Front panel LEDs, call out
on alarm (COA), SNMP
TRAPs
Power
115 VAC:
116 mA, 8 W max,
27 BTU max
Mechanical
Housing:
Plastic standalone case
Mounting:
Desktop or horizontal rack
Dimensions:
12 inches (30.40 cm) wide
2 inches (5.08 cm) high
9 inches (22.86 cm) deep
Weight:
4 pounds (1.814 kg)
Environmental
Storage Temp:
32
°
to 122
°
F (0
°
to 50
°
C)
Operating Temp:
−
4
°
to 185
°
F (
−
20
°
to 85
°
C)
Humidity:
95% maximum (non -
condensing)
Compatibility
TR 62310:
November 1987
TR 62310A:
December 1989
(addendum 3)
TR 41450:
November 1981
Internet Standards: RFC 1157 (SNMP)
RFC 1155 (SMI)
RFC 1213 (MIB-II)
RFC 1055 (SLIP)
Enterprise TXPORT MIB
Enterprise DDS MIB
DDS -I Port Data Rates
Standard mode
Port A:
Sync onlyat 56 kbps
Port B:
Inactive
Proprietary, non-TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
38.4, or 52 kbps
Async at 2.4, 4.8, 9.6,
19.2, 38.4, or 57.6 kbps
Port B:
Inactive
Proprietary, TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
or 31.2
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 31.2
*
kbps
Port B:
Sync at 2.4, 4.8, 9.6, 19.2,
or 31.2
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 31.2
*
kbps
*
Only one port can be set for 31.2 kbps at a
time. If Port A is set to 31.2 kbps, Port B is lim-
ited to 19.2 kbps. If Port B is set it 31.2 kbps,
Port A is limited to 19.2 kbps.
DDS -II Port Data Rates
Standard mode
Port A:
Sync only at 64 kbps
Port B:
Inactive
Proprietary, non-TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
38.4, 56, 60 kbps
Async: at 2.4, 4.8, 9.6,
19.2, 38.4, 56, 57.6 kbps
Port B:
Inactive
Proprietary, TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
or 38.4
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 38.4
*
kbps
Port B:
Sync at 2.4, 4.8, 9.6, 19.2,
or 38.4
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 38.4
*
kbps
*
Only one port can be set for 38.4 kbps at a
time. If Port A is set to 38.4 kbps, Port B is lim-
ited to 19.2 kbps. If Port B is set it 38.4 kbps,
Port A is limited to 19.2 kbps.
Connections
SUPV/SLIP and DDS Pinout
Port A and Port B Pinouts
Pin SUPV/SLIP
DDS
1
DTR Out
Data Out (Tip)
2
RTS Out
Data Out (Ring)
3
Frame Gnd
4
Data Out
5
Data In
6
Signal Gnd
7
CTS In
Data In (Tip)
8
DCD In
Data In (Ring)
ITU Ckt Name
V.35
RS-232 EIA-530 DCE
101/AA
Frm Gnd
A
1
1
Gnd
102/AB
Sgnl Gnd B
7
7
Gnd
103/BA
TxD
P, S
2
2, 14
In
104/BB
RxD
R, T
3
3, 16
Out
105/CA
RTS
C
4
4, 19
In
106/CB
CTS
D
5
5, 13
Out
107/CC
DSR
E
6
6, 22
Out
108/CD
DTR
H
20
20, 23
In
109/CF
DCD
F
8
8, 10
Out
114/DB
TC
Y, AA 15
12, 15
Out
115/DD
RC
V, X
17
9, 17
Out
141/LLB LL
18
18
In
140/RLB RL
21
21
In
142/TM Test Mode
25
Out
45-00129
4.0
41TDM
Configuration Guide
SCROLL
EXIT
SELECT
TDM
TEST ALARM POWER
PRISM 41TDM
T
R
A
N
S
P
O
R
T
®
LAN
SLIP
SUPV
DDS
DBU
PORT A
PORT B
115VAC
50/60Hz
116ma
