VeriFone HPV-20, Installation Manual, Page: 23 / 38

HPV-20 Installation Guide
◆
17
Ins
ta
llation
2 15. When the HPV-20 software and the Ruby application software are
installed, connect the serial cable from the Ruby terminal COM 1 to
the e-PC serial port.
16. Do one of the following:
– If the Ruby terminal is not plugged in, plug in the terminal.
– If the Ruby terminal is already running, unplug the square plug
from the power supply. Wait 30 seconds then plug the terminal
back into the power supply. (See figure 8.)
Warning: Do not unplug the round connector from the power
brick.
17. When Gemstall has completed, the Ruby terminal boots to the
following display:
J:\Doc\Frame\HPV20\Graphics\Camera\Power Supply Ruby1 small.bmp
Figure 8: Ruby Power Supply
Insert HPV-20 Card now and press a key
(PRESS A KEY TO CONTINUE)