33
11.0.0 –REMOTE CONTROLS
The four button remote control enables you to play one of three pre-set bell functions by
pressing a key.
•
Key 1 plays Bell One.
•
Key 2 plays the Funeral Toll.
•
Key 3 plays the Instant Toll.
•
Key 4 is the Stop key.
Note: These functions are set at the factory and may differ from what is listed above.
The full function remote offers great flexibility. Much like finger button, it can play any
song as long as the song number is known. Below is a picture that shows the front of the
full-function remote.
To Play a Song
•
Begin by typing the digits of the song number you want to play, use the numeric
buttons to enter the song number to be played. For example, type 0085 to play song
number 85. All entries need to consist of 4 digits. Add 0s as first digits to any song
less having less than 4 digits.
•
Press the Enter key to start playing the song. The remote will send the data to the
receiving system.
•
The display will then go blank.
•
When playing is finished, the remote will automatically turn off.
Note: To interrupt playing enter 0 in to the remote and press the ENTER button. Playing
will immediately be interrupted.
•
Remote will automatically turn off after 15 seconds of no button use.
Summary of Contents for DBC 870
Page 1: ......