28
7.1.1 -ENABLE TIME PROGRAMMING
To enable the time programming press and hold the symbol
for about 5 seconds.
The led on the symbol will turn on.
7.1.2 -CLOCK STRIKE INTERRUPTION
To inhibit clock strike for an indefinite time (the clock strike will automatically turn on if a
time clock strike has been programmed to turn on at a certain hour)
Press and hold the clock strike symbol
for more than 5 seconds.
Check that the clock strike led is OFF
To manually enable the clock strike:
Press and hold the clock strike symbol
for more than 5 seconds.
Check that the clock strike led is ON.
Summary of Contents for DBC 870
Page 1: ......
