7.3 Panel Removal
Disconnect the product from the electrical supply.
7.3.1
Side Panel
The side panel is located on the right-hand side of the product. To gain access to the
products electrical components:
1. Remove all screws holding the panel in place. The bottom of the panel is con-
structed in such a way that it will hinge downwards and allow access to electrical
components without the need to remove the panel entirely
2. Ensuring that the bottom edge of the panel remains in contact with the main cas-
ing, carefully lower the panel downwards to expose the products electrical com-
ponents
Note:
Make a note of all connections before disconnecting any wiring.
7.3.2
Internal Element Cover
To gain access to the heating element, thermocouple and fan:
1. Open the oven door. The internal element cover is situated on the right-hand side
of the oven chamber
2. Remove any shelves fitted inside the chamber
3. Remove all screws holding the internal element cover in place
4. Gently lift the panel away from the main oven chamber lining and remove it from
the product
23
7.0 Repairs and Replacements
Summary of Contents for CARBOLITE GERO PF 200
Page 32: ......
Page 33: ...Notes Service Record Engineer Name Date Record of Work ...
