Page
11
of
19
Manual TTMA-100K
7
Supporting vehicle and adjustment
It is important that the TTMA is mounted correctly behind the supporting vehicle. Mounting the
TTMA behind the vehicle can be done with a DIN connector and Rockinger. Make sure the
connection with the truck is done or checked by Verdegro or a distributor, and that a certificate is
given. Also make sure the bumper of the truck is correctly installed. The TTMA is tested with a 40mm
DIN coupling, so a 50mm will also be correct.
It is allowed that a country overrules the specifications of the supporting vehicle, for example (valid
for the Verdegro TTMA):
Sweden: Lower limit weight of the truck 9.000 kgs, upper limit by manufacturer
4
Belgium: Lower limit weight of the truck 8.000 kgs, upper limit 9.440 kgs
Make sure the DIN coupling is correctly installed. Only use couplings certified
or delivered byVerdegro
Make sure the ROCKINGER and bumper are correctly installed!!!
4
If you have a truck which is heavier, contact Verdegro or your distributor.
