Page
56
of
68
Operation and maintenance manual Verdegro Blade
12.2
Inspection table TMA installed to spring suspension trucks
General inspection points (It they are in bad
condition, use of the Blade is forbidden)
Every
application
Weekly
Monthly
Level hydraulic oil
X
Condition hydraulic cylinders
X
Leakage hydraulic
X
Condition of the hydraulic hoses
X
Inspection of blades inside the cut and bend
mechanism (opened and closed)
X
Visual inspection of both racks, no damage
or were out is shown
X
Operate the Blade fully down & extend, fully
retract and up, check all functions and check
all led’s on cabin controller are working well
X
Visual inspection of shafts, bolts and
structural bearings
X
Operation-end position defectors
X
Always check if green LED is shown at cabin
controller in operation position fully down
and extended !
X
Visual inspection loose machine parts
X
Cracks
X
Damage on the cushion
X
Horizontal position, cushion down
X
Table 3