Page
48
of
68
Operation and maintenance manual Verdegro Blade
9.2
Specifications for truck mounting
The Blade Truck bracket is full scale crash tested ( one Truck Bracket survived all required
tests without necessary exchange or repair !). We require it to use this standard bracket.
Other connections are available on request and have to be reviewed by Blade B.V. or it
will be responsibility of the installation company.
The Blade Truck bracket contains
2 pieces “Multi Bracket” (one Left & one right)
and 1
“fixed width bracket”.
The multi brackets can be assembled to “each” truck chassis w
ith a width of 750mm
–
900
mm and the bracket installation height is laser cutted at the steel bracket part ( detail
circle ) !
Always install the mud flaps and tire protection, this will fit directly to the bolts and nuts
connection.
Do not install any electric wiring or connectors at the mud flaps/ tire protect !
Figure 37
Figure 38
Figure 35
Figure 36
