background image

1906

USB-C

 to HDMI 4K Adapter 

with 1.5m Cable

QUICK INSTALL GUIDE

FCC Compliance

This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

WEEE Notice

The Directive on Waste Electrical and Electronic Equipment (WEEE), which 
entered into force as European law on 13th February 2003, resulted in a 
major change in the treatment of electrical equipment at end-of-life.

The WEEE logo (shown at the left) on the product or on 
its box indicates that this product must not be disposed 
of or dumped with your other household waste. For 
more information about electronic and electrical waste 
equipment disposal, recovery, and collection points, please 
contact your local municipal household waste disposal 
service or shop from where you purchased the equipment.

CE Declaration

Complied the requirements set out in the Council Directive on 
the Approximation of the Laws of the Member States relating to 
Electromagnetic Compatibility (2014/30/EC) and Low Voltage Protection 
2006/95/EC.
 
This declaration applies to all specimens manufactured identical to the 
model submitted for testing/evaluation.
 
EN 55032:2012+ AC:2013 (Class B)
EN 61000-3-2:2014
EN 61000-3-3:2013
AS/NZS CISPR 32:2013
EN 55024:2010
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006+ A1:2007+ A2:2010
IEC 61000-4-4: 2013
IEC 61000-4-5: 2014
IEC 61000-4-6: 2013
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the 
European Parliament and of the Council of 18 December 2006, on the 
restriction of the use of certain hazardous substances in electrical and 
electronic equipment (RoHS) and its amendments. Substances of Very 
High Concern (SVHC) including 169 substances contained in Candidate 
List of June 20th 2016 are not present in this product range above 
permitted levels.

Verbatim_QIG_49144_90x65mm_1926.indd   1

25-06-19   16:39

Reviews: