38
0900‑4868 REV‑08
PROCEDURE 8. USE THE PLAYBACK FEATURE (OPTIONAL)
Recorded videos and snapshots on a USB flash drive can be viewed on the GlideScope Video Monitor.
Note: The monitor cannot play back videos or display snapshots while a recording is in process.
1. On the back of the monitor, remove the USB port cap, and then insert a USB flash drive into the port.
2. Ensure that the USB flash drive is detected by checking if the
USB Flash Drive
icon
on the bottom of
the screen is displayed.
3. Press and hold the
Tutorial
button 3 seconds or longer. The playback menu is displayed.
Figure 11. Playback Menu
20130411_213043.avi
20131101_132115.avi
20131101_132217.jpg
20130411_143605.avi
20140110_203355.avi
20140114_203419.avi
20140114_205213.jpg
Tutorial
4. Navigate the menu as follows:
• Press the
Snapshot
button to move up the list of playback files.
• Press the
External Video
button
to move down the list of playback files.
5. When you have selected the item that you want to play, press the
Tutorial
button . Playback starts.
6. When the file is being played back and is displayed on the screen, press the
Snapshot
button to
playback the next file above the one currently displayed. Press the
External Video
button
to play
the next file below the one currently displayed.
7. If the file being played back is a video, pause and resume playback by pressing the
Tutorial
button .
8. Press the
Record
button
to return to the playback menu.
9. Press the
Record
button
again to close the playback menu.
