25
Operations & Maintenance Manual: Setting Up
0900‑4868 REV‑08
CONNECT TO AN EXTERNAL MONITOR (OPTIONAL)
Please read the
section before performing the following tasks.
By using an HDMI‑to‑DVI cable, you can connect the GlideScope Video Monitor to an external monitor
that is approved for medical use. For more information, please contact your Verathon Customer Care
representative.
Note: Image quality on the external monitor may vary according to the resolution of the external monitor.
Note: To maintain electromagnetic interference (EMI) within certified limits, the GlideScope BFlex system
must be used with the cables, components, and accessories specified or supplied by Verathon. For additional
information, see the
section on page 10 and the
section on page 44. The use of accessories or cables other than those specified or supplied may result in
increased emissions or decreased immunity of the system.
1. Ensure that the video monitor is turned off.
2. On the back of the monitor, remove the HDMI cap from the video‑out port.
3. Connect the HDMI end of the cable to the video‑out port.
Video‑out port
4. Connect the other end of the cable to the DVI port on an external monitor that is approved for
medical use.
5. Press the
Power
button. The monitor turns on.
6. Press the
External Video
button. The indicator LED to the right of the button illuminates when the
connection is successful, and the video displays on the external monitor.
7. To stop sending video to an external monitor, press the
External Video
button again.
8. Before disconnecting the HDMI‑to‑DVI cable, ensure the video monitor is turned off.
