Venturer PLV91187S52, Owner'S Manual, Page: 24 / 34

24
PLAyING A DISC
1. Press the / I button to turn the unit on.
2. Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on
the remote.
See CUSTOMISING THE FUNCTION SETTINGS before proceeding to step 3.
3. Push down the knob to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front,
until you hear a “click”.
5. Push disc door gently to close it.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either
bring you to the main menu of DVD, or start playing the DVD. If the unit does not automatically
start playing the DVD, press the
PLAy button.
PLAyING A PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
1. Push down the knob to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front,
until you hear a “click”.
3. Push the door gently to close it. The picture files on the disc will be displayed one by one
automatically.
4. Press the
STOP
button to go to the folder list.
5. Press the or button to highlight a file to play. Press the PLAy button to start playback.
Note:
• You can press the
PAUSE button to interrupt playback, and press the PLAy button to resume
playback.
• You can press or to list the previous or next block of files.
• You can use the numbered buttons to enter the image number to quickly select any image.
• Press the
ANGLE button on the remote control to rotate the picture by 90°.
This instruction manual explains the basic instructions of this unit. Some DVDs are produced with limited
operation during playback. For example, many DVDs do not allow users to skip government warnings, or in
some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted
by the unit or disc.
CD / DVD OPERATION
PAUSING PLAyBACK (STILL MODE)
Press the PAUSE button. To resume normal playback, press the PLAy button. Each time you press
the PAUSE button, the picture advances one frame on DVD.
STOPPING PLAyBACK
Press the STOP button at the location where you want to interrupt playback. To resume playback at
the position where the disc was stopped, press the PLAy button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAy
button will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the PREV button to go back to previous titles/chapters/tracks.
• Press the NEXT button to advance titles/chapters/tracks.
• For an audio CD, use the number buttons on the remote control to go directly to the desired track
number and press PLAy .
PLV91237S52_IB_VEN_W020.indd 24 1/14/2011 18:21:23