10
Connecting with Headphones/Earphones
Standard headphones/earphones
Headphones/earphones supporting the balance connection
Connect to the PHONE/
OPT.OUT terminal
Connect the PHONE/OPT.OUT terminal with the line input ter-
minal of the destination.
Set [Audio settings] - [Analog output settings] - [Line output
mode] to [On] when performing line output.
Connect to the BAL terminal
R-
R
+
L
+
L-
●
Connecting anything other than the above plug may cause
malfunction by shorting, etc.
●
Do not connect the earphones/headphones to both
PHONE/OPT.OUT terminal and the BAL terminal simul-
taneously. It may cause malfunction due to power con-
sumption and high load.
●
Replacement of the connection plug or modification of the
cable may be required when connecting earphones/head-
phones to the BAL terminal. VentureCraft is not liable for
any damage, etc., of the device caused by modification.
Caution
Caution
Connecting with an External Device
Line output
3.5mm stereo mini plug
●
Do not connect the earphones or headphones when set to
line output mode.
Make sure that the earphone or headphone plug is discon-
nected when setting [Line output mode] to [On].
It is played back at the maximum output level (2Vrms) re-
gardless of the volume position when [Line output mode]
is set to [On].