(800) 451-2606 VentureLighting.com
Read These Instructions Completely and Carefully
Before You Begin
U
SER
M
ANUAL
STOP
V
E N T U R E
L
I G H T I N G ’ S
L E D W
A L L PA C K
F
I X T U R E
Installation Using Mounting Brackets
1:
Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
2:
Remove the existing luminaire. Dispose of the existing lamp(s) and ballast(s) per local requirements.
3:
Rotate the 3 mounting brackets on the back of the fixture as desired (Figure 1).
4:
Secure the fixture to the wall fix (Figure 2 & 3).
5:
Make the appropriate wiring connections.
6:
Close the fixture and restore power to the fixture.
Installation Using Internal Mounting Fasteners
1:
Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
2:
Remove the existing luminaire. Dispose of the existing lamp(s) and ballast(s) per local requirements.
3:
Remove the back cover from the fixture (Figure 4).
4:
Secure the back cover to the wall fix (Figure 5).
5:
Place the front of the fixture onto the back cover and make the appropriate wiring connections.
6:
Close the fixture and restore power to the fixture.
Figure 1
Figure 2
Figure 3
Figure 5
Figure 4
