5
www.ventilation-system.com
Supply voltage, 50 (60) Hz [V] 110-230
Maximum current [A]
0.012
Cable type
2х0.35 mm
2
Temperature range [°C]
from +10 up to +45
Humidity range [%]
10-80 (without condensation)
Casing material
Plastic
Sensor surface material
Glass
SEC class
IP30
Weight [g]
190
DiMensiOns
Control panel
86 mm
R 2 mm
42.5 mm
13.5 mm
68 mm
82 mm
60 mm
wi-Fi data
Standard
IEEE 802.11 b/g/n
Frequency band [GHz 2.4]
2.4
Transmission power [mW] (dBm)
100 (+20)
Network
DHCP
WLAN safety
WPA, WPA2
Mounting box
94 mm
34 mm
3 mm
TeChniCAL DATA
CUT OFF POwer sUPPLY BeFOre AnY OPerATiOns Are PerFOrMeD
The COnTrOL PAneL MUsT Be insTALLeD BY A QUALiFieD eXPerT OnLY, PrOPerLY
TrAineD AnD hAVinG The reQUireD TOOLs AnD MATeriALs
MOUnTinG, COnneCTiOn AnD seTUP
ChOOsinG LOCATiOn FOr COnTrOL PAneL insTALLATiOn
examples of wireless alternatives and system operation scenarios
example 1
: direct control panel connection to master ventilator without using a router.
The control panel must be installed within the range of the Wi-Fi access point built into the master ventilator.
Master ventilator
(Wi-Fi access point)
Mobile device Mobile device
Control panel
(Wi-Fi client)
Control panel
(Wi-Fi client)
• Set the ventilator to Wi-Fi access point master mode
(see the ventilator user’s manual).
• Install the control panel within the range of the Wi-Fi
access point built into the ventilator.
• Pair the control panel with the ventilator (see below).
Note: the limitations specific to the number of devices
that can be connected to the ventilator in the Wi-Fi
access point mode are detailed in the ventilator user’s
manual.
