Vents FFK 125, User Manual

Page: 6 / 28

6
KAM
www.ventilation-system.com
Designation example:
КАМ 150 Eco Bypass T1 ___/___
Model
KAM – chimney fan
Connection spigot diameter [mm]
Motor characteristics
_ – asynchronous with an additional impeller for blowing and cooling
Eco – with an external rotor
EcoDuo – two-speed with an external rotor
Eco max – with an external rotor and a high-powered motor
Max – with a high-powered motor
EcoDuo Max – two-speed with an external rotor and a high-powered
motor
Casing design
Bypass – a fan in a single casing with a backdraft damper and bypass
system
Options
_ – with a thermostat
T1 – without a thermostat
Power supply [V/Hz]
_ – 220/50 (default) voltage/frequency
DESIGNATION KEY
OPTIONAL ACCESSORIES FOR FANS
• Air duct on the air inlet side: Aluvent 125, 140, 150 or 160. Fire-resistant (M0) semi-flexible 3 m long air duct.
• Insulated air duct on the air outlet side: 605-ISO (MO/M1) 127, 152 or 182. Fire-resistant (M0/M1) heat and sound insulated flexible
air duct. The length varies depending on the length of the duct network.
• Supply disk valves: AM 125 PRF, AM 150 PRF. Metal supply disk valves. At least 1 disk valve must be installed in every heated room.
Connecting and mounting elements of air ducts:
• T-joint: TM 125, TM 140, TM 150, TM 160.
• Y-joint: TMU 125, TMU 140, TMU 150, TMU 160.
• Cross tee: KM 125, KM 140, KM 150, KM 160.
• Reducer: RM 160/150, RM 150/140.
• Couplings: Coupling 125, Coupling 140, Coupling 150, Coupling 160.
• Screw clamp: X 125, X140, X 150, X 160, XB 125, XB 140, XB 150, XB 160.
• Aluminium adhesive tape: ALT 050/10.
• External thermostat: Vents TS-1-90.
• Speed controller: RS-1-300.
The duct system must be free of plastic parts