10
CBF LP 110 DC (Light) (TH/TP)
www.ventilation-system.com
The fan is rated for connection to single-phase AC 100-240 V 50/60 Hz power mains.
The fan is connected to power mains using insulated, durable and heat-resistant conductors (cable, wires) through the QF automatic
circuit breaker with a magnetic trip built into the stationary wiring. The position of the automatic circuit breaker must ensure free access
for quick power-off of the unit.
WiRiNg DiAgRAM OF THE FAN
ACCESS TO THE TERMiNAL BOX FOR CONNECTiNg THE FAN TO POWER MAiNS
L2
L1
N
L
N
LT
N
L
N
L
QF
1
2
3
4
5
6
7
FAN
Х1
QF
100-240 V
50/60 Hz
100-240 V
50/60 Hz
LIGHT
(the connector is only used
in models with an LED module)
Remove the decorative grille.
For accessing the connection terminals
loosen the screw on the terminal box
lid and take the lid off.
Remove the protective cap and install the cable gland.
ANY TAMPERiNg WiTH THE iNTERNAL CONNECTiONS iS PROHiBiTED
AND WiLL VOiD THE WARRANTY.
POWER OFF THE POWER SUPPLY PRiOR TO ANY OPERATiONS WiTH THE UNiT.
THE UNiT MUST BE CONNECTED TO POWER SUPPLY BY A QUALiFiED ELECTRiCiAN.
THE RATED ELECTRiCAL PARAMETERS OF THE UNiT ARE giVEN ON THE
MANUFACTURER’S LABEL.
CONNECTiON TO POWER MAiNS
