Vents AOW 25, User Manual

Page: 9 / 16

9 www.ventilation-system.com
MOUNTING AND SET-UP
READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.
FAILURE TO PROVIDE MINIMUM DISTANCE TO WALLS OR CEILING WILL IMPAIR THE
UNIT AERODYNAMIC AND THERMAL CHARACTERISTICS AS WELL AS SERVICE LIFE OF
THE UNIT.
Provide free air access to the fan intake vent while installing the unit.
The minimum distance between the wall or ceiling and the AOW unit is 300 mm.
While mounting the unit provide enough access for maintenance or repair work.
The unit is designed for mounting on walls or any other vertical surface as well for ceiling mounting using the fixing brackets.
While connecting the water-to-air heat exchanger to the water mains, disable any loads that can damage the unit or tight connections.
Layout of the heat medium piping must ensure quick detachment for easy servicing and repair operations.
Install a mud filter at the heat medium inlet to the heat exchanger.
Mounting accessories:
Model Mounting angles Bracket Multi-angle bracket
AOW 25
MKP-AOW MK-AOW 25 MKU-AOW 25
AOW 30
MKP-AOW MK-AOW 30 MKU-AOW 30
AOW 45
MKP-AOW MK-AOW 45 MKU-AOW 45
AOW1 25, AOW1z 25
MKP-AOW MK-AOW1 25 MKU-AOW1 25
AOW1 30, AOW1z 30
MKP-AOW MK-AOW 25* MKU-AOW 25
AOW1 45, AOW1z 45
MKP-AOW MK-AOW 30* MKU-AOW 30
*The cross pieces between the MK-AOW mounting brackets are not applicable in case of mounting to the AOW1 and AOW1z units.
INSTALLATION OF THE UNIT WITH AN MK-AOW MOUNTING SET
The MK-AOW mounting bracket is used for ceiling or wall mounting of the unit. Not included in the delivery set, available as a special
accessory.
CEILING MOUNTING WITH MK-AOW
min 300 mm min 300 mm
WALL MOUNTING WITH MK-AOW
AOW AOW1, AOW1z