background image

Introduction - 6

Product Description

The Ventrac KW450 weather cab is designed for the sole purpose of sheltering the operator from the 

weather while providing superior visibility. Standard features include a front windshield wiper, front and rear 

LED work lights, a large left-side entry door, right-side emergency exit, door and side windows that can be 

quickly and easily removed, and a 4-point seatbelt.

Optional accessories include a strobe light, directional lights, defrost fan, and heater kits. Refer to your 

national and/or local regulations for lighting requirements specific to your intended application.

NOTE: The KW450 weather cab cannot be used with the Ventrac KH500 versa-loader or the Ventrac 

RV600 Collection Vacuum.

Why Do I Need an Operator’s Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely 

operate, maintain, and service your machine. It is divided into sections for convenient reference of the 

appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-

ing the operator’s manual will help you become familiar with each specific piece of equipment. Under

-

standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the 

equipment. Keep this manual with the machine at all times. The manual should remain with the machine 

even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-

tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both 

the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine 

while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual 

may result in personal injury and/or damage to the equipment.

INTRODUCTION

Accessories

Item Description

Part Number

Directional Signal/Flasher Kit

70.2005-2

Strobe Beacon Kit

70.2006-3

Mirror Kit

70.2006-4

Defrost Fan Kit

70.2006-6

KW450 Console Fan/Heater Kit (Kubota engines)

70.2009-51

KW450 Console Fan/Heater Kit (Kawasaki engine)

70.2009-52

V

enture Products Inc. is pleased to provide you with your new 

Ventrac KW450 weather cab! We hope that Ventrac equip-

ment will provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you 

versatility

 as you use your KW450 weather cab. Please visit our 

web site, or contact your authorized Ventrac dealer for a com-

plete list of items available for your new KW450 weather cab.

Summary of Contents for KW450




















































































Reviews: