INTRODUCTION
Introduction - 5
Product Description
The KV552 V-blade is designed for the sole purpose of snow removal and moving loose materials. The
KV552 V-blade is an excellent tool for snow removal with all the capabilities of a conventional blade, plus
the added versatility of sweeping both wings back for single pass clearing of sidewalks or sweeping both
wings forward to clear large areas without the need for repeated cleanup passes.
Each blade wing can be angled forward or backward 30 degrees using the power unit’s secondary S.D.L.A.
lever. The angle of each wing is controlled independently with a 12 volt electro-hydraulic valve activated by
a switch on the power unit. The power unit must be equipped with a 12 volt switch & plug kit*.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
KV552
Accessories
Item Description
Part Num
ber
Snow Containment Belt Kit
70.8044
6” Top Flare Extension Kit
70.8045
6” Extension with 6” Top Flare Kit
70.8046
6” Straight Edge Extension Kit
70.8047
Polyurethane Cutting Edge Kit
70.8048
V
enture Products Inc. is pleased to provide you with your new
Ventrac KV552 V-blade! We hope that Ventrac equipment
will provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility
as you use your KV552. Please visit our web site, or
contact your authorized Ventrac dealer for a complete list of
items available for your new KV552 V-blade.
*The power unit
must be
equipped with a 12 volt front switch & plug. Refer to your power unit operator’s manual for the proper 12 volt front
kit for your power unit.